Introduction CASE 580 Backhoe Loader Cutting Edge 112946A1
| Specification | |
|---|---|
| Part Number | 112946A1 |
| Application | CASE 580L / 580M / 580N / 580NEP / 580SL / 580SM / 580SN / 570LXT / 570MXT / 570NEP |
| Blade Type | Double beveled reversible bucket cutting edge |
| Length | 83.125 inches |
| Width | 6 inches |
| Thickness | 0.75 inch |
| Bolt Quantity | 10 plow bolts + 10 hex nuts (included) |
| Bolt Size | 3/4″ x 2-1/4″ (750 x 225) plow bolt / 3/4″ hex nut (750 HEX NUT) |
| Bolt Hole Spacing | 8.5 inches center to center |
| Edge to First Hole | 3.344 inches from bucket edge to center of first hole |
| Weld Cladding | Applicable |
| Installation | Bolt-on, no modification needed |
Robust Construction for Backhoe Loading Applications
The CASE 580 Backhoe Loader Cutting Edge 112946A1 features a double beveled reversible design. It is built specifically for the CASE 580 series backhoe loaders. The blade measures 0.75 inch thick, 6 inches wide, and 83.125 inches long. Consequently, it provides full-width protection for the loader bucket. The heat-treated steel construction ensures consistent hardness throughout the blade. Therefore, it resists wear from abrasive materials like gravel, sand, and demolition debris. Additionally, the reversible feature allows operators to flip the edge when one bevel becomes dull. As a result, service life effectively doubles compared to single-bevel alternatives.
Simple Installation with Complete Hardware Package
This cutting edge includes all necessary mounting hardware for quick installation. The blade has 10 bolt holes with precise spacing of 8.5 inches from center to center. Additionally, the first hole sits 3.344 inches from the bucket edge. These measurements match CASE OEM specifications exactly. Therefore, no drilling or modification is required. The kit includes 10 pieces of 3/4″ x 2-1/4″ plow bolts and 10 pieces of 3/4″ hex nuts. For best results, clean the bucket mounting surface thoroughly before installation. Then, apply anti-seize compound to prevent thread corrosion. Finally, torque all bolts evenly in a crossing pattern. When the first bevel wears out, simply flip the blade and reuse the existing hardware. Consequently, maintenance downtime stays minimal.
H2 Frequently Asked Questions About CASE 112946A1 Cutting Edge
What are the blade dimensions? 83.125 inches long, 6 inches wide, and 0.75 inch thick.
What blade type is this? Double beveled reversible bucket cutting edge.
How many bolts are included? 10 plow bolts (3/4″ x 2-1/4″) and 10 hex nuts (3/4″).
What is the bolt hole spacing? 8.5 inches center to center; 3.344 inches from edge to first hole.
Which CASE models fit this edge? 580L, 580M, 580N, 580NEP, 580SL, 580SM, 580SN, 570LXT, 570MXT, and 570NEP.
Can I flip this blade? Yes. The double bevel design allows reversal when one side wears.
Is weld cladding applicable? Yes, weld buildup works well for extra protection in severe conditions
Reviews
There are no reviews yet.