1. Volvo L70 Cutting Edge 11011413 Simple Dimensions for Easy Installation
All the main measurements are listed below, so you can double-check that this edge fits your loader before you install it. The length gives you full bucket coverage, the width provides a strong cutting surface, and the thickness adds extra strength for heavy pushing. The bolt diameter is standard and easy to match with your existing hardware.
| Specification | Measurement |
| Length | 20.5 inches |
| Width | 14.5 inches |
| Thickness | 0.75 inches |
| Bolt Diameter | 0.625 inches |
All the Bolt Details You Need
We make installation simple by giving you every bolt and hole measurement up front. You will not need to hunt for missing parts or guess which bolts go where. This cutting edge comes with clear hole positions and bolt counts, so you can mount it securely and evenly. Proper bolting means the edge stays tight during work, reducing vibration and wear on both the blade and your loader.
| Hole / Bolt Info | Detail |
| Hole 1 Qty | 8 holes |
| Hole 1 Distance (End to 1st Hole) | 4.25 inches |
| Hole 1 Distance (1st to 2nd Hole) | 3.75 inches |
| Hole 2 Distance (1st to 2nd Hole) | 4 inches |
| Hole 2 Distance (2nd to 3rd Hole) | 4 inches |
| Bolt 1 Qty | 4 bolts |
| Bolt 1 Length | 2.5 inches |
| Bolt 2 Qty | 2 bolts |
| Bolt 2 Length | 2.5 inches |
Advantage of Volvo L70 Cutting Edge 11011413
The Volvo cutting edge 11011413 features a double bevel design, which means both sides are angled for sharper cutting action. This helps the edge stay sharp longer, so you do not have to change it as often. It cuts through dirt, gravel, sand, and other heavy materials with less effort from your machine. The steel is tough and heat-treated to handle the daily punishment of loading jobs. It resists bending, cracking, and wearing down too fast. With this blade, you get more work done in less time, and you save money because it lasts longer than cheaper edges.
Get the Perfect Fit for Your Volvo L70 Loader
This Volvo L70 Cutting Edge 11011413 is made specifically for the Volvo L70 Series loader. Every measurement is precision-matched to your machine, so you know it will fit right the first time. No guesswork, no drilling, and no modifications needed. Just take it out of the box, line it up with your existing mounts, and bolt it on. You can get back to work in minutes without wasting time on adjustments. Whether you are replacing an old worn-out edge or keeping a spare on hand, this part gives you peace of mind that it is built to match factory specs.
Contact:
Email: info@apexcuttingedge.com
Reviews
There are no reviews yet.